How to Clean A Dyson Vacuum-10 Easy Ways

Read Time:10 Minute, 2 Second

Is your Dyson vacuum starting to smell? Did you suddenly lose suction? When was the last time you cleaned the vacuum cleaner? If you don’t take the time to clean your Dyson, you will notice the impact on its performance. Suction and general suction will begin to lag. Your vacuum cleaner may also be difficult to empty, causing it to make strange noises or even cut off completely. Knowing how to clean a Dyson vacuum cleaner can make your trusted vacuum cleaner run again immediately, not to mention prolong its life. However, don’t worry – here we will explain in detail how to clean your Dyson vacuum cleaner, whether you have a stick, cylindrical or vertical vacuum cleaner.

Table of Contents

How Often Should You Clean Your Dyson Vacuum?

Generally speaking, the filter should be cleaned once a month to ensure the best performance of the Dyson battery and prolong its service life. But it depends on how often you use the vacuum cleaner. If you use a vacuum cleaner every day, you may find that your Dyson vacuum cleaner gets dirty faster, so it’s not unwise to clean it quickly every few weeks.

If you notice that your vacuum cleaner stops working, even if the jar is empty, this is another signal that it needs cleaning.

Some more advanced Dyson vacuum cleaners even include sensors that tell you when to clean the filter through the display.

How to Clean a Dyson Vacuum?

Cleaning your Dyson vacuum cleaner is a simple task when you know what you are doing. You can follow our steps every month or two.

What Do You Need?

Sink or sink
Microfiber cloth
bolt driver
scissors
Compressed air (optional)
Distilled white vinegar (optional)

Steps and Ways to Clean a Dyson Vacuum

1. Unplug the appliance

Safety first. This may be common sense, but it is necessary to make sure that you have unplugged the appliance This will make your work safer and reduce the risk of electric shock.

2. Empty the Canister

If you want to keep it clean for a long time, cleaning the jar may be the most important aspect of cleaning your Dyson.

As usual, once filled with dust, remove it and pour out the rest. Dyson vacuum cleaners are bag free, so if possible, clean them outdoors to prevent allergies and dirt.

At first, in some exceptional cases, you can usually find metal cans under your Dyson cyclone. If you use a V-series vacuum cleaner, take the vacuum cleaner to the garbage can and press the red garbage can button at the bottom to dump the contents of the garbage can into the garbage can.

Then, the next step is to shake well and clean the inside of the can with a microfiber cloth. When cleaning the dirty room, please make sure not to use any chemicals or detergents, which may make the material sticky. Some user manuals also explain not to clean any part of the Dyson cyclone with water. Press the button on the dust can, release the base, and pour the debris into the garbage can. Be sure to shake it to remove as much dirt as possible.

3. Wash and Clean the Canister

Now you can clean the inside of the can with a wet microfiber cloth Microfiber is a good material because it has a positive charge. This means that it can easily capture dust and dirt particles and hold them tightly so that they no longer stick to the dust can. If you want to clean the dustproof canister, make sure it is completely dry. Leaving too much moisture and moisture may cause mold growth. Use detergent or any cleaning chemicals.

4. Remove the Filter

When the canister is dry, it is time to dispose of the filter The filter of the Dyson vacuum cleaner plays a vital role in keeping the home clean. It will absorb dust, pollen, bacteria, and dust particles in the air. In this step, what you need most is your user manual – “read the manual about disassembling and cleaning the vacuum cleaner filter, because the operation process of different models of vacuum cleaners may be different.

Your vacuum filter is an important component – it basically captures any large particles, such as dust and pollen, and contains them in your vacuum to protect the motor and prevent them from being released into the air. If it is often used, the filter will inevitably be covered and blocked by dust and needs to be cleaned.

Some Dyson vertical vacuum cleaners have more than one filter. This may include another one behind the “ball” or machine. Take out the filter and clean it.

Operate the filter under cold water to remove dust and debris. It is best not to use any detergent or chemicals.

You can squeeze the water out gently and repeat the process until the water becomes clear. You can tell when it is clean at a glance.

You must allow the filter to dry thoroughly before you insert it into the vacuum cleaner. It may be damaged in the tumble dryer. So you can put it in a warm place at home for about 24 hours.

Some of Dyson’s instructions say that you should clean the filter every three months. However, if you use vacuum cleaners frequently and the floor is dirty, you may need to clean it more frequently.

With our Dyson filter, we simply remove the filter and check its dust and dirt level. If it’s dirty, we’ll clean it up right away.

5. Wash the Filter and Dry it

Once separated, carefully take out the filter and remove the dust from the trash can – you can tap it gently to remove most of the dust. Once you have done this, take the filter indoors, rinse it under cold water, and gently wipe the last dust with your hands.

Now, fill it with warm water, cover the opening with your hand, gently shake it, and finally rinse it. Pour out the water. Depending on the dirty degree of the filter, you need to repeat this step as much as possible, or until the water becomes very clear. Then shake the filter to remove the excess components and dry it for at least 24 hours. Before replacing the filter, make sure it is completely dry. If the filter is still wet when you reinstall it, your Dyson may not turn on at all.

6. Untangle the Brush Roll

According to our experience, the Dyson comb roll will be blocked quickly, especially if you have pets or people with long hair in your family. A clogged brush roller will eventually affect your daily cleaning effect.

Now it’s time to deal with the long hair wrapped around the brush roll. Take a pair of scissors (preferably nail clippers) and cut them along the. Do not pull or force any hair, as this may damage the vacuum. Be careful not to damage the bristles when trimming.

The most important tip: the thinner the scissors, the better you can cut all the hair curled on the comb.

Brushes collect all hair, debris, and dust from the floor and carpet. After a period of time, it will pile up and tangle up, reducing the cleaning efficiency. So, prepare a pair of scissors and a slotted screwdriver to complete this step.

You need to remove some of the Dyson vacuum cleaner’s bottom plates to clean the brush sticks. Various models require the use of a slotted screwdriver to remove the screws.

There are other models that you can simply unscrew with a coin. For example, Dyson dc39 animal vacuum is like this. Then you simply take out the brush.

You can also manually remove large pieces of debris from the brush. Next, use scissors to cut off the hair and anything wrapped around it.

You can use a wet microfiber cloth to clean the brush bar compartment. Just make sure it is completely dry, then insert the brush and fix it on the base plate.

7. Check And Unclog The Hose

Do not ignore the hose! If your Dyson vacuum suddenly stops working, you may be dealing with the blockage. Remove the hose and check if this is the case. If you have a long, thin object, such as a mop handle, you can use it to remove obstructions.

It is best not to use any irritating chemicals on the vacuum hose. This could cause irreversible damage. Instead, you can make your own household cleaner with distilled white vinegar to kill the bacteria and bacteria lurking inside the cleaner. You can soak the hose in a mixture of warm water and vinegar for 5 to 10 minutes to remove bacteria, which may be easier if your hose is U-shaped.

8. Clean the attachments

Don’t forget to browse through the attachments. If you often use your crack tool or mini power tool, these will need to be checked.

Remove the dust and sticky hairs on the tools by hand or by using the main brush roll. Then wipe the accessories with a wet microfiber cloth.

9. Wipe Down the Outer Portions of Your Dyson Vacuum

Diluted vinegar mixtures are also suitable for this task. Just remember to dry the vacuum cleaner thoroughly before using it again. Don’t forget to wipe the outside of your Dyson vacuum cleaner. Also, a wet microfiber cloth is what you need – to avoid oversaturating your machine.

You may want to consider disinfecting the floor and wheels of your vacuum cleaner. Dragging on dirty floors and carpets may mean they also have dirt.

Diluted vinegar mixtures are also suitable for this task. Just remember to dry the vacuum cleaner thoroughly before using it again.

10. Leave Everything to Dry Then Reassemble

This is crucial Before reassembly, ensure that all components are thoroughly wiped and dried, and allow everything to dry for at least 24 hours.

If you re-assemble Dyson with wet components, mold may grow, but Dyson will not start if the components are wet, so you may have to wait longer to use your components again.

Can You Wash The Cyclone Part of A Dyson?

It is not recommended to clean the cyclone component, but to consider placing it on the garbage can and blowing away the debris by compression. Clean it with air.

The cyclone part of the Dyson vacuum is a special filter, which uses centrifugal force to filter out finer dust particles. Strictly speaking, you can wash it. Dyson’s official advice (open in the new label) is to wash the device with water and shake it gently while filling it with tap water.

However, many people find that this brings more problems than it solves – in particular, the dust accumulated on the filter will turn into mud, making it more difficult to remove.

Read More About More Dyson Vacuum:

Summary

Cleaning your Dyson is an important task that you should complete at least once a month. This can improve your cleaning process and help your vacuum cleaner last longer.

Before using the vacuum cleaner, make sure that the plug of the vacuum cleaner is unplugged. Before using the filter, wipe the dust cartridge with a wet microfiber cloth.

Then you can handle the brush strip to make sure it is not tangled. Don’t forget to clean the water pipe, too. Finally, make sure everything is dry before using the vacuum cleaner again.

How to Empty a Dyson Vacuum Cleaner-Different Types

How to Clean A Dyson Vacuum-10 Easy Ways

How Often Should You Clean Your Dyson Vacuum?