The Tineco iFloor and the Bissell Crosswave are two of the top wet-dry vacuums available today, and we’ll be comparing them in today’s guide. You’ll discover all about the features they provide and how they can make your life a little easier and more enjoyable.
Let’s say you’re looking for a wet-dry vacuum that is of the highest caliber possible. Wet-dry vacuums and the general design that makes up a wet-dry vacuum have been perfected by Tineco or Bissell, so you must choose one of those two brands.
What Exactly is a Wet Dry Vacuum?
The funny thing about wet dry vacuums is that there are actually two definitions that are commonly used, and they both refer to different types of vacuums.
Therefore, the first definition refers to a vacuum that has been made to vacuum up dry matter, which is what every vacuum cleaner can do generally, as well as wet paint, which refers to things like water.
These vacuums are highly regarded and useful. However, this kind of vacuum is not the topic of our discussion today.
We will instead discuss the wet-dry vacuums that double as mops and vacuums. It’s an additional description of a wet-dry vacuum.
Both of these wet-dry vacuums—the Tineco iFloor and the Bissell Crosswave—have essential vacuuming features as well as a mopping function that uses water to speed up cleaning. You can beautify the appearance of your floors by using these two features!
Wet Dry Vacuum | Tineco iFloor | Bissell Crosswave |
Item Weight | 6.5 pounds | 11 pounds |
Specific Uses For Product | Hard floor | Hard floor, Carpet, Dual action |
Power Source | Cordless | Corded |
Tineco IFloor
This wet-dry vacuum weighs 6.5 pounds, which is not a lot. Because the Tineco iFloor was created with mobility and adaptability as one of its primary functions, it has a significant advantage.
You see, since this is a cordless wet/dry vacuum, you can move it wherever you need to clean as long as you have battery life.
Naturally, there are many benefits to this, but one of the biggest benefits is how easily you can clean crevices and tight corners. Something that many wet dry vacuums struggle to do.
You can wash your floors in addition to vacuuming. It implies that sweeping is not a prerequisite for mopping. You could instead vacuum up all of the dust and debris from your bed and then mop up all of the muck and grime from your floor. Your home will have some lovely feet once the cleaning process is finished!
The Tineco Cleaning Solution that you use while cleaning helps the washing process go more quickly. This remedy is quite effective at removing pet stains, including muddy paw prints.
You can activate a mode known as “Spot Mode” while cleaning, making it significantly easier for you to remove various stains and dirty spots on your floor in a shorter period. When the brush needs to be cleaned, all you have to do is press a button and hold it down for three seconds.
In the end, the Tineco iFloor is a wet-dry vacuum that is incredibly well made, lightweight, adaptable, simple to use, and efficient. This is a fantastic option if you’re looking for the definition of efficient simplicity!

Bissell Crosswave
The Bissell Crosswave weighs 11.5 pounds more than the Tineco iFloor, but this isn’t necessarily a drawback. You do not have the same level of adaptability and versatility, though, which is a negative.
You can simultaneously vacuum and wash your floors with the Bissell Crosswave. But the crucial distinction between the Tineco iFloor and the Bissell Crosswave is that the latter is a wet-dry vacuum that is made for a wide range of surfaces.
Rugs and tile flooring. Mats made of rubber. Linoleum floors. Additionally, there are many hardwood floors. You are restricted to hard floors when using the Tineco iFloor because it lacks this level of adaptability and freedom.
Because the cleaning capabilities have been developed to accommodate a variety of different floor types, this is a great option for a wet-dry vacuum if you have a slightly more varied floor.
One of the things that Bissell has emphasized a great deal in their recent products is that they are “pet-friendly.” It indicates that their products are made to be used around pets and used to clean up after pets. Additionally, 10% of each sale is donated to the Bissell Pet Foundation.
The Bissell Crosswave is no exception, and it excels at removing pet messes and odors as well as dog hair.
In the end, the Tineco iFloor is a more compact wet dry vacuum than the Bissell Crosswave, which nevertheless provides more versatility and power. This is a fantastic option if you’re looking for something strong and efficient but perhaps a little less user-friendly.
CrossWave Vs. IFloor Comparison
Bissell CrossWave | Tineco iFloor | |
Brand | Bissell | Tineco |
Weight | 11.5 pounds | 6.5 pounds |
Power Source | Corded | Cordless |
Surfaces | Floors | Bare Floors |
Rugs | Sealed Wood Floors | |
Hard Floors | ||
Item Dimension | 10.5 x 12 x 46 in | 10.6 x 9.8 x 43.7 in |
Capacity | 0.4L | 0.55L |
Vacuum & Wash | Yes | Yes |
Multi-Surface Cleaning | Yes | Yes |
Two-Tank Technology | Yes | Yes |
Design – CrossWave Vs. IFloor
The Tineco iFloor has a more subdued appearance compared to the Bissell CrossWave wet and dry vacuum.
The Bissell CrossWave and Tineco iFloor still sport distinctive aesthetics even though they both adopt the shape of contemporary upright vacuum cleaners. You get a more overt design with Bissell’s wet and dry vacuum. The machine has striking sections and edges made of bright lime green. The base and water tank components are made primarily of plastic and are transparent as well. It almost has a robotic appearance from a distance.
The original Tineco iFloor mimics Bissell CrossWave’s penchant for combining transparent and opaque compartments. Although it has a more subdued exterior thanks to its choice of white and grey. In contrast to the CrossWave’s angled style, this tool’s handle and edges are also rounded. Compared to Bissell’s wet and dry vac, the Tineco iFloor cordless vacuum cleaner is also lighter.
There are some hardware similarities between the CrossWave and the iFloor. They have user-facing control buttons on their handles, for instance. An accessible trigger for the solution spray can be found below. Along with side wheels, Bissell and Tineco have improved the maneuverability of their vacuums by including a swivel component on the foot.
Cleaning Performance – CrossWave Vs. IFloor
When it comes to power, Bissell’s CrossWave triumphs, while Tineco’s iFloor has the upper hand in terms of maneuverability.
The Bissell CrossWave is more potent than the Tineco iFloor, as would be expected from a corded model. It has a 4.4 amp motor and a 528 watt rating. The cordless iFloor, on the other hand, has a 128 watt rating and a 2500mAh battery. An iPhone 12 has a battery capacity of 2815mAh as a point of comparison. You only get a little over 20 minutes of runtime due to the iFloor’s low power. While most spills should be easily cleaned up with that, the Bissell CrossWave is a better choice if you intend to perform a more thorough cleaning.
The iFloor excels in maneuverability. It is simple to move around the house because it is wireless. Concerning your proximity to a plug, you need not worry. With corded vacuums and a 25-foot cable, Bissell’s CrossWave aims to address this frequent complaint. cord. That’s kind wiring for you. Additionally, compared to the iFloor’s 10 inch cleaning path, the CrossWave offers a wider 12-inch cleaning path. Even though two inches might seem insignificant, they add up when you’re working with larger floor surface areas.
Additionally, compared to the iFloor, the CrossWave has larger clean and dirty water tank capacities. This results in longer-lasting mopping performance when coupled with CrossWave’s strong motor. Both appliances fall short of standalone vacuum cleaner performance when it comes to vacuuming. For dirt and debris, Bissell outperforms the other two. However, Tineco’s iFloor has the advantage for an allergen-free home because of its integrated HEPA filter.
Brushes and Formulas – CrossWave Vs. IFloor
Compared to the Tineco iFloor wet and dry vacuum, the Bissell CrossWave is compatible with more brushes and cleaning agents.
Brush rolls are one of Bissell’s CrossWave’s strengths. An automatic dual-action multisurface brush comes with the CrossWave All-In-One as standard. Nevertheless, you can change this based on the surface you’re working on. For example, the Area Rug brush roll has scrubby, widely-spaced bristles to help remove dirt and debris from rugs and carpets. There is a Gentle Clean brush roll with softer bristles for delicate wood floors.
For picking up pet dander and fur, you could even choose a brush roll with no tangles. The Bissell Crosswave Pet Pro is a superior choice for households with furry friends, though. There is only one type of brush roller available for the Tineco iFloor. The soft roller head is washable, detachable, and has two different uses: vacuuming and washing. However, it is only appropriate for hard floors. Purchase a Bissell machine if you want to clean rugs.
Now, each vacuum cleaner performs best with its corresponding cleaning formula. You get more variety from Bissell, just like with the brushes. The cleaning formulas for the CrossWave usually go well with the kind of rollers being used. Users can select products that are designed for carpeted, hard, or wooden surfaces, for example. However, Tineco only offers one formula type, which it refers to as a deodorizing and cleaning solution.
Other Features
Bissell’s CrossWave lacks a self-cleaning mode, whereas the Tineco iFloor has one.
The CrossWave by Bissell might be superior in terms of power and selection of brush rolls. The Tineco iFloor is less complicated to maintain, though. This is so that the iFloor can clean itself with the touch of a button. Tineco’s original wet and dry vacuum comes with a self-cleaning docking station with every purchase. For good measure, users also receive a 3-in-1 cleaning tool. A HEPA filter, replacement roll, and cleaning solution are also included in the box by Tineco in addition to the vacuum.
The Bissell CrossWave, on the other hand, comes with a parking tray, cleaning solution, and multisurface brush roll. There are no additional filters or parts present. A self-cleaning mode is another thing you lose. The only convenience feature you receive, at most, is an integrated handle for carrying near the water tanks.
Conclusion
Excellent wet-dry vacuums include the Tineco iFloor and the Bissell Crosswave. But they are somewhat dissimilar from one another because they both have different areas of focus.
For simplicity and ease-of-use, the Tineco iFloor is a fantastic choice! For power and efficiency, then you can’t go wrong with the Bissell Crosswave!
Frequently Asked Questions
The frequently asked questions and the corresponding answers are listed in this section.
Is Tineco Better Than Bissell?
Contrary to Tineco, Bissell is a well-known brand. However, the Chinese brand is more cost-effective, particularly when it comes to cordless wet and dry vacuums. A model that stands out due to its innovative features is the iFloor ONE S3.
Can You Use Lysol in a Bissell CrossWave Wet/dry Vacuum Cleaner?
No, Lysol shouldn’t be used in your CrossWave because it can clog the system. Use only approved cleaning products, or make your own with ingredients like rubbing alcohol, castile soap, vinegar, lemon juice, and the like.
What is the Difference Between Bissell CrossWave Multi Floor Vs CrossWave Pet Pro?
Although these models are part of the same series, the former is made for hard floors and the latter has extra features for dealing with pet messes.
Who Makes Tineco?
The same company that produces Deebot robot vacuums, ECOVACS Robotics Group, also produces Tineco vacuums.